Resultado de búsqueda
25 de jun. de 2017 · If the key is stuck in the cylinder and won't turn all the way, pull the battery cable to be safe then take a plastic handled screwdriver and tap the end of the key while you try to turn it. I had one stuck in the van that wouldn't turn off.
12 de oct. de 2019 · If your Corvette’s key is difficult to insert or remove, or if you struggle to turn the key, it may be a sign that the ignition cylinder is damaged. In such cases, seek the assistance of a professional mechanic to diagnose and repair the issue.
2 de feb. de 2011 · I have to jiggle the **** out of the shitter till the botton pops up some. Then you can turn the key the rest of the way back and remove your key.
25 de ene. de 2017 · Turn the key to the Run position, engine off. If fault codes are not flashing in the Driver Info Center the most common failure is a faulty PKE receiver.
Initial C4 Corvette Start Action: Once rotating the key to the start position if the anti-theft system has not disabled the starter the engine will rotate. Once the oil pressure has reaches 4 PSI, the oil pressure switch contacts will close allowing the fuel pump to run.
12 de nov. de 2019 · If the key is difficult to turn or requires a lot of strong twisting and jiggling, it could be due to a bad ignition switch. If you notice any of these symptoms, it is important to have the ignition switch checked by a professional mechanic.
12 de abr. de 2010 · 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON (vehicle will not start). 3. Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF. 4. Turn OFF the ignition, and wait 5 seconds. 5.
