Resultado de búsqueda
Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. Never replace a broken fuse with anything other than a new fuse. Use always an intact fuse of the same color. If a fuse blows again contact a qualified service center.
Remove the cover from the fuse box. Check each of the large fuses in the under-hood fuse box by looking through the top at the wire inside. Removing these fuses requires a Phillips-head screwdriver. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided ...
To check a fuse, look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Before replacing fuses check that the key has been removed from the ignition and that all the services are switched off and/or disengaged. Always disconnect the battery before servicing high current fuses.
This video shows the radio and Onstar Nexium fuse location for a 2006-2011 Chevrolet HHR.
To check a fuse, look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Before replacing fuses check that the key has been removed from the ignition and that all the services are switched off and/or disengaged. Always disconnect the battery before servicing high current fuses.
To check a fuse, look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Notice. Before replacing fuses check that the key has been removed from the ignition and that all the services are switched off and/or disengaged. Always disconnect the battery before servicing high current fuses.
Warm White 3000 in a Fuse LED Alternative for 3AG. The LE-GF8V-WW is an LED Fuse base lamp which offers an LED alternative for equipment that needs a replacement for a traditional incandescent 3AG bulb. Operating on 8V AC or DC, the LED Fuse lamp produces a warm white light of 3000-degrees Kelvin. The LE-GF8V-WW is suitable as an LED ...
