Resultado de búsqueda
Options for Welding Through Metal Deck are available for this stud. For similar function studs, see Nelson H4L Headed Concrete Anchors and D2L Deformed Bar Anchors. When ordering, specify Type, Diameter, Length, Material, Quantity, and Part Number. Example: S3L 3/4 x 6-3/16”; Mild Steel; 10,000 pieces; #101098015.
customers. This information pertains solely to Nelson studs and related accessories. Use of this information in conjunction with non-Nelson studs and related accessories is not recommended by Nelson Stud Welding, Inc. Nelson Stud Welding, Inc. assumes no financial or physical responsibility for damage or harm resulting from this information’s
19.05 S3L 206 101-098-023 Short form specification 22.23 S3L 93 101-098-029 To insure that certified Nelson products are used, the following 22.23 S3L 106 101-098-031 specification is suggested. "Headed anchors shall be Nelson 22.23 S3L 131 9.53 34.93 101-098-035 type H4L or S3L, flux filled welded to plates as shown on the
S3L - Shear Connectors
s f y Yield Kg (min) A s f s Tensile Kg (min) A s Area of stud shank f s Ultimate strength (tensile): Cold Finished low carbon steel M13, M16, M19 and M22 420 Mpa min C 0.23 max f y Yield strength 345 Mpa min Mn 0.90 max Elongation 20% P 0.04 max Reduction Area 50% min S 0.05 max NELSON STUD WELDING NELSON STUD WELDING PROPERTIES GUIDE
En los elementos constructivos, los pernos conectores transmiten fuerzas cortantes horizontales a la losa de concreto, propiciando que actúen como una sola unidad (SECCION COMPUESTA), La alta resistencia a la tensión, incrementa la capacidad de carga viva, así como el necesitar de hasta un 20% menos de acero.
S3L Shear Connectors. Composite design, joining concrete to steel. Increases loading capacity in bridges, buildings, etc. H4L Concrete Anchors. Embedment plates. Frames and curbing. LNG vessels. Precast industry. PSR Punching Shear Resistor. High-shear load areas in concrete construction. Reduces the amount of reinforcement needed.
