Resultado de búsqueda
GENERAL DESCRIPTION. The NJU3716A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport assignment of MPU is available as the connection between NJU3716A and MPU using only 4 lines. The serial data synchronizing with 5MHz or more clock can be input to the ...
The 'LS674 is a 16-bit parallel-in, serial-out shift register. A three-state input/output (SER/Q15) port provides access for entering a serial data or reading the shift-register word in a recirculating loop. The device has four basic modes of operation: Hold (do nothing)
Generally, shift registers operate in one of four different modes with the basic movement of data through a shift register being: Serial-in to Parallel-out (SIPO) – the register is loaded with serial data, one bit at a time, with the stored data being available at the output in parallel form. Serial-in to Serial-out (SISO) – the data is ...
The 74F675A contains a 16-bit serial in/serial out shift reg- Serial-to-parallel converter ister and a 16-bit parallel out storage register. Separate 16-Bit serial I/O shift register serial input and output pins are provided for expansion to 16-Bit parallel out storage register longer words. By means of a separate clock, the contents of the ...
This example is based on the 74HC595. The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-state." In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. You can link multiple registers together to extend your ...
The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. ... TIDA-00170 — 16-Bit Analog Mixed Input and Output Module for Programmable Logic Controller (PLC) ...
It is not practical to offer a 64-bit serial-in, parallel-out shift register requiring that many output pins. ... The microprocessor would need to transfer 16-bits of data with 16-clocks before generating an RCLK feeding both devices. The discrete LED indicators, which we show, could be 7-segment LEDs. Though, ...
