Resultado de búsqueda
Puncture test with a pendulum punching device. Request now. Article number: 530055. Norm: DIN 53142-1. The penetration energy is defined as the energy (joules) that is converted when a solid or corrugated board is punctured with a pointed penetrator.
The most common impact test methods are Charpy and Izod and are typically run using a pendulum impact tester. This can be either manual or motorized and consists of: A swinging hammer (mass) A rigid frame to support the hammer. An angular measurement system to measure the absorbed energy. A test fixture to hold the specimen.
19 de may. de 2021 · Scope. 1.1 This test method covers the determination of resistance of film to impact-puncture penetration. Knowledge of how the impact energy is absorbed by the specimen while it is deforming under the impact loading, and the behavior of the specimen after yielding, is not provided by this test.
This document specifies a method for determining the puncture resistance of board using a pendulum device. This document is applicable to all types of board, including corrugated fibreboard and solid board, especially those used in the manufacture of packaging cases.
The test principle consists of puncturing a board sample with a striking head, triangular pyramid shaped, and fixed to a pendulum. The required energy for the striking head to cross the sample completely is measured. This means, to do the initial puncture, tear and open the board. EQUIPMENT DESCRIPTION. The equipment comes with:
The pendulum swings the impact head through the clamped specimen with sufficient force to puncture the sample, and the energy used is recorded. This fixture allows customers to meet the ASTM D3420 standard for pendulum impact resistance of plastic films. Features. Complies with ASTM D3420. Air clamp assembly – min 60 PSI.
the Ray-Ran Advanced Universal Pendulum Impact Tester utilises advanced microprocessor technology to determine the energy required to break or rupture specimens such as plastics, composites, ceramics and non ferrous metals to international testing methods for izod, charpy and tension impact testing. along with pipe testing, component testing and...
