Resultado de búsqueda
The test principle consists of puncturing a board sample with a striking head, triangular pyramid shaped, and fixed to a pendulum. The required energy for the striking head to cross the sample completely is measured. This means, to do the initial puncture, tear and open the board. EQUIPMENT DESCRIPTION. The equipment comes with:
Infórmate sobre la DIN 53142-1:2003-09 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device¡Entra y cómprala!
12 de sept. de 2003 · The impact puncture pendulum test lends itself to measuring the test result as units of energy to break the test sample. It is unlike Izod, Charpy and Tension impact tests, in that these have a critical section/zone in the test sample that encourages the failure to take place.
Puncture test with a pendulum punching device. Request now. Article number: 530055. Norm: DIN 53142-1. The penetration energy is defined as the energy (joules) that is converted when a solid or corrugated board is punctured with a pointed penetrator.
This document specifies a method for determining the puncture resistance of board using a pendulum device. This document is applicable to all types of board, including corrugated fibreboard and solid board, especially those used in the manufacture of packaging cases.
The pendulum swings the impact head through the clamped specimen with sufficient force to puncture the sample, and the energy used is recorded. This fixture allows customers to meet the ASTM D3420 standard for pendulum impact resistance of plastic films. Features. Complies with ASTM D3420. Air clamp assembly – min 60 PSI.
The most common impact test methods are Charpy and Izod and are typically run using a pendulum impact tester. This can be either manual or motorized and consists of: A swinging hammer (mass) A rigid frame to support the hammer. An angular measurement system to measure the absorbed energy. A test fixture to hold the specimen.
