Resultado de búsqueda
31 de jul. de 2016 · If you suspect an increased level of oil discharge in your Mercedes-Benz Actros compressor, you can easily check it with this step-by-step guide. Learn how to perform the test, what to look for,...
This compressor takes natural gas which is pumped up from underground together with oil at an oil well head and reinjects it into the oil field for EOR (Enhanced Oil Recovery). High pressure natural gas injection compressor is applied for this use.
An ejector is used in upstream processing to compress or boost the pressure of an entrained fluid. It is an alternative to a vapour recovery unit (small compressor recovering gas) in some applications. It can be less capital cost, lower operational costs, and less maintenance intensive.
1 de sept. de 2018 · Oil-injection improves twin-screw compressor performance significantly and its overall effect depends on the working fluid mass flow rate, the shaft speed, the injection position and the injected oil temperature.
Ejectors systems have a simple design, they are reliable and require low maintenance because they work without moving parts. Devices for the conveyance, compression or mixing of gases, vapors, liquids or solids in which a gaseous or liquid medium serves as the motive force.
14 de dic. de 2020 · Oil carry-over occurs when the oil that is used to lubricate your air compressor makes it past the separator filter and into the pipes. The main causes of oil carry-over are excess oil in the reservoir, low temperatures, faulty separator filters and scavenge lines, and oil degradation.
Ejectors are used across a wide range of applications in the Oil & Gas Industry. They can be used effectively for gas compression, fluid mixing and liquid pumping duties. Process fluid streams can vary greatly, from hydrocarbon gas to produced water, to sand slurry and to multi-phase Well-streams.
