Resultado de búsqueda
Part 2 for specific details of inspection. 1. Description and Overview Pressure relief devices are used to provide a means of venting excess pressure which could rupture a boiler or pressure vessel. A pressure relief device is the last line of defense for safety. If all other safety devices or operating controls fail, the pressure
The RD500 ATLAS is a reverse-acting scored rupture disc, suitable for the most challenging industrial pressure relief applications. Utilizing Fike’s patented G2 Manufacturing Technology, this rupture disc is pre-engineered and will provide highly accurate and reliable overpressure protection. RD500 ATLAS High Performance Rupture Disc.
ATLAS type rupture disc is dedicated to contact with both liquids and vapors. High ... 100% CE, KOSHA 95% ASME: YES: YES: YES: YES* YES: ATLAS/ATLAS-LO ... 27 psig to 820 psig || 1.86 barg to 56.54 barg: Burst Pressure Tolerance: ± 2 psig for burst pressures ≤ 40 psig
technical Data. Materials: Metals, fluoropolymers, graphite or a combination of these Sizes: 0.12" to 43" (3 to 1100 mm) Pressure range*: 0.58 to 1813 psig (.04 to 125 barg) Temperature range: -328° to 1112°F (-200° to 600°C) *Depending on design, size, material and temperature.
AD Rupture Disc Form No. R.1.19.01-5 AD SERIES - AD, AD-V DESCRIPTION The Fike AD Series Bolt Type Rupture Disc is specifically designed for overpressure and/or vacuum protection of atmospheric vessels. The AD-V Series Bolt Type Rupture Discs are designed for overpressure only. For sanitary applications, please see data sheet R.1.44.01 AD-H Series.
Performance Features. Superior surface finish. Recommended for CIP / SIP Service. Designed for gas, liquid and multi-phase service. Suitable for operating pressure to 90% of the marked burst pressure (95% of the minimum) Designed for non-fragmentation, recommended for Relief Valve isolation. Damage safety ratio ≤ 1. Suitable for cycling service.
30° Insert Type Holders. designed C.D.C.'s Insert of ASME, to install Type Holders the bolt are circle or JIS class flanges. Available 304 or 316 materials Stainless include Steel. Carbon Special Steel, materials are available Refer to Table pressure maximums for ASME Class V for recommended upon request.
